Archie's Archery Depot

Although fiberglass screens are very resilient, between pets, kids, and severe weather they can take quite a beating. And what starts out as a small tear or fray will eventually become a giant hole if it's not taken care of. Rips and tears in window, door and patio screens are more than just a eye sore, mosquito's and other biting insects can carry a variety of harmful pathogens. Thanks to the tool free installation of this Prime-Line Products Self Stick Screen patch, you've got no excuse not to patch those holes. These 3''x3'' charcoal color adhesive fiberglass patches install quickly and easily.

Whip your closet or workspace into shape with the Command Large Hook, a damage-free solution for hanging items in your home and office. This large utility hook holds up to 5 pounds. Thanks to the innovative Command Adhesive strips, you can mount and remount it without damaging your walls--no nails, tacks, or tape required.Large Hooks (White)Weight Capacity: 5 poundsDamage-free hanging leaves no sticky residue or stains on your wallHook holds up to 5 poundsApply and remove hook in secondsHolds strongly on a variety of surfaces, including paint, wood, and tileIdeal for organizing closets and workspacesA damage-free solution for hanging items in your home and office. Innovative, Damage-Free ApplicationEasy application and removal keeps your walls damage free.Ideal Hook for Organizing Closets and WorkspacesMaximize your closet space by adding a large Command Hook to the back or front of your closet door. Instead of tossing jackets, robes, and other items on your bed or chair, hang them up neatly on hooks of their own. This sturdy hook is also handy in guest rooms or any other closet space in your home.This large Command Hook can also help you organize your workspace. Dedicate your hook to cables, cords, or tools weighing 5 pounds or less. Keep your work area tidier by getting those tools off the bench and onto the wall. If you need to rearrange your space, you can easily remove and relocate the hook.Simple Application and Damage-Free RemovalApplying Command Hooks to just about any flat, clean surface is as easy as 1, 2, 3. Allow the adhesive strip an hour to set after application, and you'll be ready to hang any item up to 5 pounds. An ideal alternative to nails, tacks, or tape, Command Adhesive holds strong, yet leaves no sticky residue or stains.To remove, simply grasp the hook and stretch the Command Strip straight down until the base and strip release from the wall. With Command Hooks, redecorating or relocating items is easier than ever.About Command Products: A Delight to Use and a Cinch to Remove3M Command products offer simple, damage-free hanging solutions for many projects in your home and office. Simplify decorating, organizing, and celebrating with an array of general and decorative hooks, picture and frame hangers, organization products, and more.Each Command product features innovative Command Adhesive Strips, which hold strongly on a variety of surfaces, including paint, wood, and tile. The adhesive removes cleanly, leaving no holes, marks, sticky residue, or stains. Replacement mounting strips are available, so you can use Command products again and again.What's in the BoxOne Command Large Hook and two adhesive strips.General-Purpose & Decorative HooksHooks MiniWeight Capacity: 0.5 pounds6 hooks, 8 strips40 strips, 48 clips (Value Pack)Hooks MediumWeight Capacity: 3 pounds2 hooks, 4 strips6 hooks, 12 strips (Value Pack)Hooks LargeWeight Capacity: 5 pounds1 hook, 2 strips (White)1 hook, 2 strips (Green)3 hooks, 6 strips (Value Pack)Wire Hooks SmallWeight Capacity: 0.5 pounds3 hooks, 4 strips9 hooks, 12 strips (Value Pack)Wire Hooks MediumWeight Capacity: 3 pounds2 hooks, 4 stripsWire Hooks LargeWeight Capacity: 5 pounds2 hooks, 4 stripsTraditional Hooks MediumWeight Capacity: 3 pounds1 hook, 2 strips (Brushed Nickel)Traditional Hooks LargeWeight Capacity: 5 pounds1 hook, 2 strips (Brushed Nickel)

Reusable utility hooks with Command adhesive. Holds firmly until you want to take it down. Easy to apply. Easy to remove. Adhesive releases cleanly, without damaging walls or leaving behind any sticky residue. To reuse, just buy the appropriate replacement strip and repeat application. Refer to model No. 17200 for Command adhesive replacement strips. No. 17002: Small utility hook, holds 1 lb. No. 17001: Medium utility hook, holds 3 lb. No. 17003: Large utility hook, holds 5 lb.

MESH TAPE - Goldblatt 300 ft.x 2 drywall fiberglass mesh tape has self adhesive backing so no mud is required when applying to the drywall. Leno weave design increase strength and reduces cuts when applying drywall compound.

HYDRODYNAMICSINGLE OR DUAL BEAM (DEPENDING ON WHICH FISHFINDER USED WITH)24 /53 200/83 KHZBUILT-IN TEMPERATURE15-FT CABLEUPC : 082324501906Shipping Dimensions : 8.70in X 7.50in X 3.20inEstimated Shipping Weight : 1.2578

The Humminbird XPT 9 20 T Portable Transducer is designed to mount on the transom or side of most smooth surface wood, aluminum or fiberglass boats. This portable transducer attaches via a heavy-duty suction cup that provides temporary installation, and holds the unit at trolling speeds only, making it inappropriate for high-speed installations. The Humminbird XPT 9 20 T is a hydrodynamic, single- or dual-beam transducer, depending on which fish finder it is used with, and utilizes 24- and 53-degree cone-angle beams with 200- and 83 kHz operating frequencies. This unit includes a built-in temperature sensor, a 15-foot connecting cable, and all the necessary portable mounting hardware. The XPT 9 20 T is designed to be used with Humminbird's; Piranha 5, Matrix 15, Matrix 17, Matrix 25, Matrix 27, Matrix 55, Matrix 65, Matrix 67, FF515, FF535, FF565, PMAX10, PMAX15, and PMAX 20 sonar systems. This item is backed by Humminbird's one-year limited warranty.

XP 9 20 TransducerFeatures:Puck Shoot Thru the Hull TransducerSingle/Dual Beam, 20/60 degree, 200/83 kHz, 15' cable For use in single layer fiberglass hullTemperature NONEFairing Block Included NONEPins NONE

The Humminbird XP 9 20 Puck Transducer is designed to mount to the inside of most fiberglass hulls with a deadrise less than 15 degrees, and transmit the sonar signal through the hull itself. Your boat's hull must be of single-layer, fiberglass construction and be free of trapped air or voids in order for a puck transducer to operate correctly, so cored fiberglass, metal and wood will not work. This unit is meant to be glued to your inner hull with a slow-cure epoxy, which is included, and connects to your compatible Humminbird sonar or fish finder system via the included 15-foot cable. The Humminbird XP 9 20 is a single/dual puck transducer and is designed to be used with Humminbird's; Piranha 1, Piranha 2, Piranha 3, Piranha 4, Piranha 5, PiranhaMax 10, PiranhaMax 15, PiranhaMax 20, Matrix 15, Matrix 17, Matrix 25, Matrix 27, Matrix 55, Matrix 65, Matrix 67, Matrix 97, FF515, FF535, and FF565. This item is backed by Humminbird's one-year limited warranty.

HUMMINBIRD 710147-1 In-Hull Puck Transducer

The Humminbird XP 9 20 T Puck Transducer is designed to mount to the inside of most fiberglass hulls with a deadrise less than 15 degrees, and transmit the sonar signal through the hull itself. Your boat's hull must be of single-layer, fiberglass construction and be free of trapped air or voids in order for a puck transducer to operate correctly, so cored fiberglass, metal and wood will not work. This unit is meant to be glued to your inner hull with a slow-cure epoxy, which is included, and connects to your compatible Humminbird sonar or fish finder system via the included 15-foot cable. The Humminbird XP 9 20 T is a single/dual puck transducer with a built-in temperature sensor, and is designed to be used with Humminbird's; Legend ID40, Piranha 5, PiranhaMax 10, PiranhaMax 15, PiranhaMax 20, Matrix 15, Matrix 17, Matrix 25, Matrix 27, Matrix 55, Matrix 65, Matrix 67, Matrix 97, FF515, FF535, and FF565. This item is backed by Humminbird's one-year limited warranty.

Scrim backed AmerGlas filters are designed for general air filtration applications with light to medium dust loading conditions. They are used in all types of HVAC systems to protect the coils from accumulating a build-up of dirt or as pre-filters to extend the life of higher efficiency filters.

(Under Hood Thermal Acoustic Lining - 32" x 54" (12 sq ft)) Reflect-A-GoldA high performance reflector born in the aerospace industry for use in extreme temperature swing environments, this state-of-the-art polymer is extremely light weight and capable of handling continual operating temperatures up to 850 F.Highly effective material for firewalls, fuel cells, engine covers, under hoods, engine compartment, bulk heads, seat bottoms anything or area that needs protection from heat.Features:Reflects up to 80% of radiant heatVirtually NO clearance neededFire resistant adhesive side rated up to 325 FSelf-adhesive backing for easy install and removalReflect-A-CoolConstructed of fiberglass material backed with a layer of aluminized reflective foil to handle direct continuous temperature of 400 F has many uses such as covering firewalls, marine engine compartments, RVs, in the tub of a racecar where typical mechanical fasteners cannot be used and has many industrial uses.Reflect-A-Cool can be trimmed to fit just about any shape. Just measure, trim, face reflective side towards source of radiant heat and remove self-adhesive backing. It s that easy.Features:Withstands 2000 F of radiant heatSelf adhesive for easy installationCan be easily trimmed to sizeVirtually NO clearance neededCool-TapeA flexible, easy to apply and ultra light weight solution to reflect heat and ideal for wrapping wiring, cables, hoses, fuel lines and covering seams. Made of one mil aluminized material bonded to woven fiberglass, Cool-Tape has a super strong self-adhesive backing capable of protecting up to 2000 F radiant heat and available in two different widths and three different lengths.Features:Withstands 2000 F radiant heatFlexible and easy to applyStrong self-adhesive backingSecure + seal panels, seal air boxes + more