Archie's Archery Depot

More Info On Fire Wire:

Making Wire Wrap Jewelry

Wire Wrapped jewelry is one of the oldest forms of Jewelry. Many people don’t know how to make wire wrapped jewelry because; many of the tutorials found online are incomplete. There are various techniques on how to wire wrap Jewelry. Wire wrapping requires jewelry wire as well as “findings” that are similar to wire to make the components. These wire components are then later connected to each other using various mechanical techniques, solder or heating the wire is not required. In most cases the wire is bent into a loop or a beautiful shape.

Forms of wire wrapped jewelry have been found dating thousands of years BC. Many of these early forms of jewelry can be seen in the British Museum, and date back to the Sumerian Dynasty, which was discovered in the cemetery of Ur, those early forms of wire wrapped jewelry are made from spiraled wire components, that date back to around 2000 BC. Making wire wrapped jewelry was a prized art in ancient Rome, This can be seen from ancient samples of wire wrapped loops that were discovered from ancient Roman sites. The ancient Roman jewelry dates back around 2000 years. This ancient technique didn’t require soldering, since most of the jewelry was made at home using simple equipment. Soldering was only developed a few hundred years later, but even then wire wrapping was considered to be more cost effective and quick.

Making wire wrap jewelry only requires a few but mandatory tools. A good pair of flush cutters as well as nose pliers would be required to cut and bend the various thicknesses of wires that you use. A flush pliers is important as it leaves the cut off end of the wire flush, while at the same time keeping the other end of the wire pointed and sharp. Round nose pliers are important as they are good for making loops with. Their flat smooth jaws make holding and gripping wire easy.

The ancient art of making wire wrap jewelry is back in fashion. Knowing how to make your own wire wrap jewelry is a great way to unleash your creative abilities.

About the Author

Source for Tutorials to make chainmaille & wire wrapped jewelery. Also shop for handmade chainmaille and wire wrapped jewlery by up & coming European artist Kriew http://www.kriew.etsy.com

What is the difference between 2 wire and 4 wire fire alarm devices?

I have seen 2 wire detectors and horn strobes, and 4 wire detectors and horn strobes. What is the difference? The 2 wires are cheaper.

In 2-wire systems the power and the detector signal are multiplexed onto 2 wires. The detector has to have circuitry to extract the power and multiplex the signal onto the wires, making them slightly more complex.

In 4-wire systems the power is separate from the signal, unless there is more than one signal from the detector (i.e. smoke & heat). It could be 2 wires for power and 2 wires for a single signal (i.e. smoke), or 1 wire for power, 1 wire for smoke, and 1 wire for heat, with the 4th wire being common to all 3.

.

Man injured in gas terminal fire
A workman is being treated for burns following a blaze at a gas terminal in the Firth of Forth.

Thanks for visiting!